The BV631 is a compact state of art shower diverter valve, the body is forged brass the cartridge is engineered plastic, The body has one 1 inlet and 3 outlets, this valve comes with 2 stainless steel stop washers (S-N) ideal to customize the installation configuration. Washer ‘S’ can be used either for RIGHT or LEFTHAND installation by simply turning the stop washer around thus turning 90 degrees, washer ‘B’ is for three-port configuration. Should two ports desired to be used, then cap the unused port.
This compact diverter valve features several installation configurations, showerheads, hand showers, spout or body showers. The BV631 diverter valve comes with a positive détente and when selecting one port to another the turnover is gradual thus eliminating the water hammer noise. The spline standard is a 20 tooth broach but it can be customized to customer requests.
In all Omni Brass valves, the spline is interchangeable also the slive, an extension is never required moreover the spline can be replaced at any time after the valve is installed by simply remove the trim and sleeve. The inside of the ports is rimmed for 1/2″ copper pipe soldering, the outside is 1/2″ NPT when soldering kip the torch flame away from the valve body, overheating the body may damage the plastic cartridge. There are 2 types of trim to choose from the trimmed gallery.
The valve is available in two modes (S) sheering mode and (N) non-sharing mode. Standard the valve is sold with (N) non-sharing so please specified the type you want.
The BV631 valve can deliver up to 10 GPM @ 60 psi, the valve is certified to CSA B125us. and ASSE standards.
The BV631 is a very versatile diverter valve. Its 3 outlets allow for multiple shower options between showerheads, body showers, hand showers, tub spouts, etc. without a confusing array of valves and controls. It’s a compact 3-outlet, 5-mode, wall-mounted diverter valve. It has the unique ability to have 2 adjacent outlets operating at the same time and still achieve a high-flow rate through both open ports. This diverter valve has a positive detent and allows for gradual turnovers from one port to another eliminating water hammer. This valve has a flow rate capable of handling volumes in excess of 14 GPM @ 45 psi.
The BV631 can be converted to a 2-outlet, 3-mode configuration simply by changing – one washer (supplied) for right or left hand application. It’s easy to install with its intuitive progressive control and positive mode detents.
For applications with thermostatic valves, consider the BV651. It’s not only a diverter valve, but it also has an internal ceramic stop, which eliminates the need for a separate volume control. Although the applications of the BV631 are nearly limitless, consult the ShowerTek Applications Page for sample installations.
The standard spline is a 20-toothed broach, but both the spline and sleeve can be customized according to manufacturers’ specifications to fit any trim.
This BREDAVALVE® valve is easily serviceable after installation. Its special design utilizes a single convenient, removable patented cartridge. No special tools are required for servicing or installation.
Certified to CSA, IAPM0, and ASSE Standards.
Brass body 1-inlet, 3 outlets wall-mounted diverter valve
Stainless steel stop washer with an engineered plastic cartridge.
Cartridge easily accessible from the front
Standard ½” threaded or sweat connections
A seamless switchover from mode to mode eliminates water hammer.
Spline and sleeve can be custom made
Trim package available
Flow rate is over 10 GPM @ 45 psi.
Max operating temp 160°F/71°C
Max operating pressure 125psi/861Kpa
Patent Pending USA, CA.
All BREDAVALVES® are certified to the standard requirements of CSA, IAPMO and ASSE. The certification program allows the BREDAVALVE® to meet all North American Plumbing codes, Federal, State/Provincial and Municipal. Please check your local plumbing codes for any additional requirements.
We offer innovative Canadian Designed and North American Patented products used by leading North American manufacturers