About This Product

BV-216 is a 3/4″ HIGH FLOW backflow preventer, the inlet and spout outlet are 3/4″, the inside of the ports are rimmed for 1/2″ copper pipe, the outside is a 3/4″ MIP thread, the hand shower port the inside is a 3/8″ FIP, the outside is 1/2″ MIP, brass body. This valve is intended only for Deck/Rim Mounted installation, and when soldering, kip the torch flame away from the body. We recommend not to overheat the valve body. The BV216 is highly recommended for Whirlpool, Walk-in tub or any large Bathtub where the time to filled the tub should be fest.
Flow Rate, delivered about 18 GPM @60 PSI.
The cartridge and all internal components are made from an engineered plastic material. The sealing comprises 2 customer-made parabolic O-ring specially designed to reduce extra dragging force also for a positive seal and a smooth seamless changeover from port to ports, thus eliminating any possibility of water-hammer noise.

RECOMMENDATION:
If the hand shower hose is directly connected to the BV216 diverter valve and needs replacement, the finished area would have to be damaged to disconnect the hose from the valve body.
Omni Brass strongly recommend using KIT-002-0216 witch is:
One 3/8 elbow, One 3/8×3/8×24″ long stainless Steel hose, One 3/8″x3/8 Coupling, then a special hose with one conical 1/5″ nut x 3/8″ FIM nut(see gallery)
What’s the benefit? Hoses for hand shower tend to break very often by using KIT 002-0216 the entire damaged hose together with the KIT 002.0216 can be extracted through the hand shower holder and replaced with the new hose.

1-Deck/Rim Mounted Diverter Valve with 2 outlets
2-3/4″ Backflow Preventer.
3-Cartridge is easily accessible from the above deck.
4-Cast brass body, engineered plastic components
5-Standard 3/4″solder inlet and spout connection
6-Spout and valve Inlet 3/4″ rimmed, outside 3/4 MIP
7-Hand shower inside 3/8 FIP thread, outside 1/2′ MIP thread.
8-Seamless switch over mode to mode eliminates water hammer.
The spline can be custom ordered.
A-Trim package is available in 2 versions.
B-The flow rate for 3/4″ outlet is over 18 GPM @ 60 p.s.i.
C-The BV216 on request is available with 2 3/4″ outlets as # (231)


2-WAY DIVERTER VALVE WITH BACK FLOW PREVENTER

The BV216 is a 2-outlet, 2-mode, deck-mounted diverter valve with an integral backflow preventer with (independent operational mode check valve)
Ideal for large tub applications as whirlpools and soaker type bathtubs where the user wishes to smoothly switch between spouts to hand showers.
This diverter valve offers a seamless switchover eliminating water hammer.
Also features a patented removable backflow preventer cartridge serviceable from above the deck. For sample installation possibilities.


SPECIAL NOTES

Standard the spline is a 20-toothed broach but can be customized according to manufacturers’ specifications.

This BREDAVALVE® valve is easily serviceable from above the deck. Its special design utilizes a single convenient, removable patented cartridge. No special tools are required for servicing or installation.

Certified to CSA, IAPM0, and ASSE Standards.


BENEFITS / FEATURES

Integral backflow preventer.
2-outlet, 2-mode, deck-mounted diverter valve
The cartridge is easily accessible from the above deck.
Corrosion-resistant, all brass body.
Standard 3/4″ (tub) threaded and sweat connections.
Standard 1/2″ M and 3/8″ F threaded connections for hand shower
The seamless switchover from mode to mode eliminates water hammer.
Spline and sleeve can be custom ordered.

Trim Package available.
Flow rate for 3/4″ outlet is over 20 GPM @ 45 psi


RN/71 SPECIFIRTIONS

Max operating temp 160°F/71°C
Max operating pressure 125ps1/861Kpa
USA 11/284,964
CA 2,488,455


COMPLIANCE & APPROVALS

All BREDAVALVES0 are certified to the standard requirements of CSA, IAPM0 and ASSE. The BV216 valve is certified to meet all North American plumbing codes, Federal, State/Provincial and Municipal. Please check your local plumbing codes for any additional requirements.


Top Selling Products

We offer innovative Canadian Designed and North American Patented products used by leading North American manufacturers

Our Blog

Plumber Product News:2020

Here are the latest product offerings for the plumbing industry

Read More

BREDAVALVE-BV100 Bidet Diverter Vacuum Breaker Valve

The bidet diverter valve BV100 from Omni Brass is a self-lubricating valve that features an integral atmospheric vacuum breaker with two-mode operation

Read More

Finding the Right Skill Level Blend For Your Plumbing Team

You don’t only employ top-level master plumbers. Every company is made up of employees with a range of varying skill sets. Here are some things to consider as you determine the correct balance of apprentices, journeymen and masters on your crew.

Read More

Back to top